Header
Product Index

Fargo - HDP5000 Card Printer/Encoder - High Definition Printer/Encoder

HDP5000Superior print quality, higher reliability and durability, greater security — your ID cards can have all these qualities when you produce them with the affordable and versatile HDP5000 Card Printer/Encoder.

 

 

  • High Definition Printing™ gives you superior print quality, even on cards with embedded electronics, for a more impressive public image.
  • Affordable pricing makes High Definition Printing available to card printer buyers everywhere.
  • High reliability and durability lowers your total cost of ownership. Backed by a lifetime printhead warranty and two-year warranty on the entire printer.
  • Versatile modular design changes with your needs. You can easily upgrade to dual-sided printing, single- or dual-sided lamination and card encoding technologies.
  • Simple operation requires only minimal training. Cards, ribbons and overlaminates come in cartridges that load in a snap.

Specifications

Print Method: HDP Dye-Sublimation / Resin Thermal Transfer

Resolution: 300 dpi (11.8 dots/mm)

Colors: Up to 16.7 million / 256 shades per pixel

Print Ribbon Options:
  • Full-color, YMC•, 750 prints
  • Full-color with resin black, YMCK•, 500 prints
  • Full-color with two resin black panels, YMCKK•, 500 prints
  • Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH•, 500 prints
HDP Film Options:
  • Clear (1,500 prints)
  • Standard Holographic (500 prints)
  • Custom Holographic, special order (500 prints)
Overlaminate Options:
  • Thermal Transfer Overlaminate, .25 mil thick, 500 prints
  • PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size)

All overlaminates available in clear, standard holographic design or custom holographic design

Print Speed:
    Batch Mode:
  • 38 seconds per card / 95 cards per hour (YMC with transfer)•
  • 46 seconds per card / 78 cards per hour (YMCK with transfer)•
  • 70 seconds per card / 51 cards per hour (YMCKK with transfer)•
  • 50 seconds per card / 72 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)
  • 75 seconds per card / 48 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)

Accepted Standard Card Sizes: CR-80 (3.370"L x 2.125"W / 85.6mmL x 54mmW)

Print Area: Over-the-edge on CR-80 cards

Accepted Card Thickness:
  • Print only: .030" (30 mil) to .050" (50 mil) / .762mm to 1.27mm
  • Print/Lamination: .030" (30 mil) to .050" (50 mil) / .762mm to 1.27mm

Accepted Card Types: ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards

Input Card Cartridge Capacity: 100 cards (.030" / .762mm)

Output Hopper Card Capacity: 200 cards (.030" / .762mm)

Card Cleaning: Replaceable cleaning roller (included with each print ribbon)

Memory: 16MB RAM

Display: User-friendly, SmartScreen™ LCD Control Panel

Software Drivers: Windows® 2000 / XP / Server 2003 / Vista

Single Wire USB 2.0 Encoding
    Options:
  • ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
  • Contactless Smart Card Encoder (HID iClass and MIFARE)
  • Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards
  • Prox Card Reader (HID read-only)

Interface: USB 2.0 (high speed) and Ethernet with internal print server

System Requirements:
  • x86 based PC or compatible
  • Windows 2000, Windows XP, Windows 2003, or Windows Vista
  • 500MHz computer with 256MB of RAM or higher
  • 500MB free hard disk space or higher

Operating Temperature: 65° to 90° F / 18° to 32° C

Humidity: 20 - 80% non-condensing

Dimensions:
  • HDP5000: 11.50"H x 12.25"W x 9.25"D / 292mmH x 313mmW x 235mmD
  • HDP5000 + Dual-Sided Module: 11.50"H x 17.50"W x 9.25"D / 292mmH x 445mmW x 235mmD
  • HDP5000 + Single-Sided Lam Module: 12.75"H x 25"W x 9.25"D / 324mmH x 635mmW x 235mmD
  • HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 12.75"H x 30"W x 9.25"D /
    324mmH x 762mmW x 235mmD
  • Lam Module: 12.75"H x 12.25"W x 9.25"D / 324mmH x 313mmW x 235mmD
Weight:
  • HDP5000: 16 lbs. / 7.3 kg
  • HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg
  • HDP5000 + Single-Sided Lam Module: 28 lbs. / 12.7 kg
  • HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg
Agency Listings:
  • Safety: UL 60950, CSA C2.2 No 60950, CB report (EN 60950), and CE mark
  • EMC: FCC Part15 Class A, EN 55022: 1998 Class A, CRC c1374, EN 61000-3-2: 2000,

EN 61000-3-2: 1995, EN 55024: 1998, CE mark, and CCC mark

Supply Voltage: 100-240 VAC, 3.8A

Supply Frequency: 50 Hz / 60 Hz

Warranty:
  • Printer – Two years including one year of free printer loaner support (U.S. only); optional Extended Warranty Program (U.S. only)
  • Printhead – Lifetime; unlimited pass

Fargo Secure Materials: Fargo Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life and printer/encoder reliability, use only Fargo Secure Materials. Fargo warranties are void, where not prohibited by law, when non-Fargo Secure Materials are used

Options:
  • Card Lamination Module – single-sided
  • Magnetic stripe encoding dual-sided (simultaneous)
  • 200-card input hopper (available soon)
  • Smart card encoding (contact/contactless)
  • Dual-sided printing
  • Door and cartridge locks
  • Printer cleaning kit

Fargo - DTC550 Card Printer/Encoder - Direct-to-Card Printer/Encoder

HDP5000A versatile, reliable, card production workhorse that supports diverse applications throughout your organization. Protects your investment by offering great flexibility whenever you need to reconfigure your ID card issuance system.

 

 

  • Can encode up to three different smart card technologies, plus magnetic stripe, in the same pass as card printing and lamination.
  • Optional Ethernet connectivity and internal print server integrates with existing enterprise networks. Allows for centralized or distributed ID card issuance.
  • Optional lamination module adds an extra layer of security and durability that helps extend card life.

Specifications

Print Method: HDP Dye-Sublimation / Resin Thermal Transfer

Resolution: 300 dpi (11.8 dots/mm)

Colors: Up to 16.7 million / 256 shades per pixel

Print Ribbon Options:
  • Full-color, YMC•, 750 prints
  • Full-color with resin black, YMCK•, 500 prints
  • Full-color with two resin black panels, YMCKK•, 500 prints
  • Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH•, 500 prints
HDP Film Options:
  • Clear (1,500 prints)
  • Standard Holographic (500 prints)
  • Custom Holographic, special order (500 prints)
Overlaminate Options:
  • Thermal Transfer Overlaminate, .25 mil thick, 500 prints
  • PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size)

All overlaminates available in clear, standard holographic design or custom holographic design

Print Speed:
    Batch Mode:
  • 38 seconds per card / 95 cards per hour (YMC with transfer)•
  • 46 seconds per card / 78 cards per hour (YMCK with transfer)•
  • 70 seconds per card / 51 cards per hour (YMCKK with transfer)•
  • 50 seconds per card / 72 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)
  • 75 seconds per card / 48 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)

Accepted Standard Card Sizes: CR-80 (3.370"L x 2.125"W / 85.6mmL x 54mmW)

Print Area: Over-the-edge on CR-80 cards

Accepted Card Thickness:
  • Print only: .030" (30 mil) to .050" (50 mil) / .762mm to 1.27mm
  • Print/Lamination: .030" (30 mil) to .050" (50 mil) / .762mm to 1.27mm

Accepted Card Types:ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards

Input Card Cartridge Capacity: 100 cards (.030" / .762mm)

Output Hopper Card Capacity: 200 cards (.030" / .762mm)

Card Cleaning: Replaceable cleaning roller (included with each print ribbon)

Memory: 16MB RAM

Display: User-friendly, SmartScreen™ LCD Control Panel

Software Drivers: Windows® 2000 / XP / Server 2003 / Vista

Single Wire USB 2.0 Encoding
    Options:
  • ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
  • Contactless Smart Card Encoder (HID iClass and MIFARE)
    • Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and
      microprocessor smart cards (T=0, T=1) as well as synchronous cards
  • Prox Card Reader (HID read-only)

Interface: USB 2.0 (high speed) and Ethernet with internal print server

System Requirements:
  • x86 based PC or compatible
  • Windows 2000, Windows XP, Windows 2003, or Windows Vista
  • 500MHz computer with 256MB of RAM or higher
  • 500MB free hard disk space or higher

Operating Temperature: 65° to 90° F / 18° to 32° C

Humidity: 20 - 80% non-condensing

Dimensions:
  • HDP5000: 11.50"H x 12.25"W x 9.25"D / 292mmH x 313mmW x 235mmD
  • HDP5000 + Dual-Sided Module: 11.50"H x 17.50"W x 9.25"D / 292mmH x 445mmW x 235mmD
  • HDP5000 + Single-Sided Lam Module: 12.75"H x 25"W x 9.25"D / 324mmH x 635mmW x 235mmD
  • HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 12.75"H x 30"W x 9.25"D /
    324mmH x 762mmW x 235mmD
  • Lam Module: 12.75"H x 12.25"W x 9.25"D / 324mmH x 313mmW x 235mmD
Weight:
  • HDP5000: 16 lbs. / 7.3 kg
  • HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg
  • HDP5000 + Single-Sided Lam Module: 28 lbs. / 12.7 kg
  • HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg
Agency Listings:
  • Safety: UL 60950, CSA C2.2 No 60950, CB report (EN 60950), and CE mark
  • EMC: FCC Part15 Class A, EN 55022: 1998 Class A, CRC c1374, EN 61000-3-2: 2000,

EN 61000-3-2: 1995, EN 55024: 1998, CE mark, and CCC mark

Supply Voltage: 100-240 VAC, 3.8A

Supply Frequency: 50 Hz / 60 Hz

Warranty:
  • Printer – Two years including one year of free printer loaner support (U.S. only); optional Extended Warranty Program (U.S. only)
  • Printhead – Lifetime; unlimited pass

Fargo Secure Materials: Fargo Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life and printer/encoder reliability, use only Fargo Secure Materials. Fargo warranties are void, where not prohibited by law, when non-Fargo Secure Materials are used

Options:
  • Card Lamination Module – single-sided
  • Magnetic stripe encoding dual-sided (simultaneous)
  • 200-card input hopper (available soon)
  • Smart card encoding (contact/contactless)
  • Dual-sided printing
  • Door and cartridge locks
  • Printer cleaning kit

Fargo - DTC400 Card Printer/Encoder - Direct-to-Card Printer/Encoder

DTC400A professional, modular card printer/encoder that's also versatile and easy to use.

 

 

  • Dual- or single-sided Direct-to-Card printing of photos, bar codes and digitized signatures.
  • Simple to operate, virtually maintenance free, and field-upgradeable with smart card, proximity and magnetic stripe encoding options.
  • Eliminates hassles of loading ribbons and cleaning rollers with exclusive SmartLoad™ ribbon cartridge.
  • Ideal for small to mid-sized businesses, K–12 schools, public safety departments, and local and state government facilities.

 

Specifications

Print Method: Dye-Sublimation / Resin Thermal Transfer

Resolution: 300 dpi (11.8 dots/mm)

Colors: Up to 16.7 million / 256 shades

Print Ribbon Options:
  • Full-color with resin black and overlay panel, YMCKO*, 250 prints
  • Full-color half-panel with resin black and overlay panel, YMCKO*, 350 prints
  • Full-color with two resin black panels and overlay panel, YMCKOK*, 200 prints
  • Full-color with fluorescing, resin black and overlay panel, YMCFKO*, 200 prints
  • Dye-sublimation black and overlay panel, BO*, 500 prints
  • Resin black and overlay panel, KO, 500 prints
  • Resin black, 1,000 prints; green, blue, red, white, 1,000 prints; silver and gold, 500 prints

YMCKO, YMCKO half-panel and YMCKOK ribbons are available in both disposable and refillable ribbon cartridges.

Print Speed:
    ** Batch Mode:
  • 7 seconds per card (K)*
  • 12 seconds per card (KO)*
  • 27 seconds per card (YMCKO)*
  • 35 seconds per card (YMCKOK)*

Accepted Standard Card Sizes: CR-80 (3.375"L x 2.125"W / 85.6mmL x 54mmW) CR-79 Adhesive Back (3.313"L x 2.063"W / 84.1mmL x 52.4mmW)

Print Area: CR-80 edge-to-edge (3.36"L x 2.11"W / 85.3mmL x 53.7mmW) CR-79 (3.3"L x 2.04"W / 83.8mmL x 51.8mmW)

Accepted Card Thickness: 20 mil to 30 mil (.020" to .030" / .51mm to .76mm)

Accepted Card Types: PVC or polyester cards with polished PVC finish; monochrome resin required for 100% polyester cards; optical memory cards with PVC finish

Input Hopper Card Capacity: 100 cards each (.030" / .762mm)

Output Hopper Card Capacity: 200 cards (.030" / .762mm)

Card Cleaning: Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each new ribbon used

Memory: 2MB RAM

Display: Easy-to-read, backlit LCD Control Panel

Software Drivers: Windows® 2000 / XP / Server 2003 / Vista

Interface: USB 1.1 (USB 2.0 compatible); optional 10/100 Ethernet with internal print server (replaces USB connection)

Operating Temperature: 65° to 80° F / 18° to 27° C

Humidity: 20 - 80% non-condensing

Dimensions:
  • 7.9"H x 13.62"W x 8.14"D / 201mmH x 346mmW x 207mmD (single-sided printer)
  • 7.9"H x 18.28"W x 8.14"D / 201mmH x 464mmW x 207mmD (with dual-sided and/or e-card encoding module)
Weight:
  • Single-Sided: 8 lbs. / 3.63 kg
  • Dual-Sided: 11.55 lbs. / 5.22 kg

Agency Listings: UL 60950-1, CSA C22.2 (60950-1), and CE

EMC: FCC Class A, CRC c1374, CE (EN 55022 Class A, EN 55024)

Supply Voltage: 100-240 VAC, 3.3A

Supply Frequency: 50 Hz / 60 Hz

Warranty:
  • Printer – Two years including free loaner printer in the first year (U.S. only); optional Extended Warranty
    Program (U.S. only)
  • Printhead – Two years, unlimited pass with UltraCard™ Cards

Fargo Secure Materials: Fargo Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life and printer/encoder reliability, use only Fargo Secure Materials. Fargo warranties are void, where not prohibited by law, when non-Fargo Secure Materials are used.

Encoding Options:
  • ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2, and 3
  • Contact Smart Card Docking Station
  • Contactless Smart Card Encoder (HID® iCLASS®, MIFARE® and MIFARE DESFire)
  • Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor smart cards
    (T = 0, T = 1) as well as synchronous cards
  • Prox Card Reader (HID read-only)
Options:
  • Dual-sided Printing Module – Field-upgradeable
  • Magnetic Stripe Encoding Module – Field-upgradeable
  • E-card Encoding Modules – Field-upgradeable
  • Printer cleaning kit
  • Ethernet networking with internal print server (replaces USB connection)
  • 100-card output hopper with or without reject tray
Call Us
1-800-401-1441
copyright © 2009 Heigl Security Technologies.All rights reserved Design and Maintained by: startupshoppe.com